
Made to measure for every frame in the house
Custom metal blinds are built to the size we measure at each window, and that matters in the houses near our North Dartmouth showroom. Few of the older Padanaram colonials and shingled capes have two windows quite the same size; frames have settled, and sash has been replaced one opening at a time. A stock blind leaves gaps. A blind made for that exact opening does not.
The ranches off Faunce Corner Road and Slocum Road bring different challenges: casement cranks, shallow replacement frames and long runs of windows that should line up. Out toward Russells Mills, deep nineteenth-century sash gives plenty of room for an inside mount. In South Dartmouth’s rooms facing Apponagansett Bay, slats sized and spaced for the window break up strong afternoon glare evenly from edge to edge.
The choices that make it yours
When you order aluminum blinds through us, very little is standard. Here is what we go through with you at the window.

Slat size
Narrow slats look light and give fine control; wider ones read as more substantial and close up with fewer lines.

Color and finish
Solid colors, metallic and textured finishes. Pick one that blends into the wall or one that makes a point.

Fit and hardware
Inside or outside mount, a valance to cover the headrail, cut-outs for cranks and handles, and the lift that suits you.
Why aluminum holds up
Aluminum is light, so even a wide blind lifts easily, and it is tough enough for the windows that see the most use: the back door, the kitchen, a child’s bedroom, a home office. It does not mind steam, it wipes clean, and the thin slats stack into a compact bundle when raised. That is why we often recommend custom metal blinds for the hardest-working windows in a house, while wood or fabric goes in the rooms where looks matter most.
Light, privacy and your view
The slats tilt to give you a range of settings. Open, they let you see out without raising the blind. Tilted up, they send light toward the ceiling and keep it off screens and furniture. Closed, they overlap for privacy. On a sunny street-facing window, you can keep the slats angled so you see out but passers-by do not see in.

Getting the measurements right
Measuring is where a made-to-order blind is won or lost. We measure every opening ourselves, at several points, because older frames are rarely square. We check the depth of the frame to decide between an inside mount, which keeps trim visible, and an outside mount, which covers a shallow or uneven frame and overlaps the glass for more privacy. We note cranks, handles, alarm sensors and anything else the blind must clear, so the cut-outs are planned before the order goes in.
Request a Consultation
Visit a showroom or let us bring the showroom to you, with samples, an expert and a free estimate.
From first visit to fitted blinds
- You request a consultation online or with the call button.
- We visit with samples from the van, or you start at our showroom in North Dartmouth, Franklin or Sagamore.
- You choose slat size, color and lift at the window.
- We measure every opening and give you a free estimate.
- Your blinds are made to those sizes and fitted through certified Hunter Douglas installation, then checked for level, tilt and lift.

Lifts and controls
Depending on the model and size, you can choose a corded lift with a wand to tilt, or a cordless lift raised and lowered from the bottom rail, which keeps loose cords out of reach of children and pets. We will show you which options apply to the slat you choose, and how each one feels in the hand.

Custom metal blinds from a Gallery dealer
Blinds & Designs is a Hunter Douglas Gallery dealer with showrooms in North Dartmouth, Franklin and Sagamore, and shop-at-home visits across our territory. We help you choose, measure, order and fit through certified Hunter Douglas installation. We offer in-home consultations with sample vans, free estimates and interior design consultations, and we repair blinds and shades you already own.
Look through the colors in the Hunter Douglas catalog, or compare aluminum with other blinds on our metal blinds page.
Towns we serve
From North Dartmouth we fit custom metal blinds across the South Coast, out onto Cape Cod and up through the towns south of Boston, with our Franklin and Sagamore showrooms closer to many of them. Town pages for blinds include Acushnet, Franklin, Plymouth, Middleborough and Sandwich.
Questions about custom metal blinds
What is the difference between narrow and wide slats?
Narrow slats give finer control and a lighter look. Wider slats look bolder and close with fewer lines, which can make a room a little darker.
Can you match blinds across a row of windows?
Yes. We measure each window separately so the blinds line up at the top and bottom even when the openings differ slightly.
Will a blind clear my casement crank?
Yes. A cut-out lets the blind hang straight past a crank or a door handle. We note them when we measure.
Inside mount or outside mount?
Inside keeps your trim on show and needs enough frame depth. Outside covers a shallow or uneven frame and overlaps the glass for more privacy.
Are aluminum blinds good for a bathroom?
Yes. They handle steam and can be wiped down, so they suit bathrooms and kitchens well.
Do you charge to measure?
No. We measure and give you a free estimate with nothing to commit to.
Book your measuring visit
Request a consultation and we will bring slat and color samples to your windows, or visit the North Dartmouth showroom to look first.
Every Hunter Douglas line we carry is on our Hunter Douglas Gallery dealer page.