
Made to measure around the common
The houses facing Foxborough’s common and lining the streets just off it were built with real ambition: Victorians and colonials with tall sash, glass transoms over doors and windows, and bays that push out from the parlor or the dining room. They are handsome, and they are exactly the kind of windows that standard store-bought shades never quite fit. Their openings need treatments made for them, which is where custom roller shades in Foxborough, MA, come in.
Head out from the center toward Route 1 and the houses change: post-war ranches first, then newer subdivisions with standard modern openings, bigger family rooms and sliding doors to the yard. Those houses are simpler to fit but have their own needs, mostly around sun and glare.
Every roller we supply is made to the measurements we take at your windows, down to the fraction. On a Victorian sash that has settled over the years, that is the difference between a shade that looks built in and one that hangs crooked with light pouring round it.
Roller shades in Foxborough, MA, for old and new houses
Our vans carry the whole Hunter Douglas roller range. These are the lines that suit Foxborough houses best, along with a link to our Hunter Douglas page for the town.

Designer Roller
Solid, textured and printed cloths, light filtering through blackout, made to fit a tall sash or a short transom.

Sonnette Cellular Roller
A roller shade with a softly curved fabric cell, a gentle fit for a Victorian parlor or a bay.

Designer Screen
A screen fabric for sunny family rooms and sliders in the newer houses, cutting the glare while keeping the yard in sight.

Hunter Douglas Dealer in Foxborough
What our Gallery dealer status means for a Foxborough house, across shades, blinds, shutters and drapery.
Why old windows need shades made for them
A window in a house that has stood for well over a century is rarely the size it was built to be. Frames settle, sash gets rehung, layers of paint build up on the stops, and the opening that started square becomes slightly wider at the top than the bottom, or a touch taller on one side. Two windows side by side in the same room can differ enough to matter.
Ready-made shades come in fixed widths and assume a square opening, so on windows like these they either leave wide gaps of light at the sides or will not fit inside the frame at all. A made-to-measure roller is built to the narrowest point of the opening for an inside mount, so it fits snugly and runs straight. Where a window is too far out of square for that, we mount the shade on the face of the casing instead, sized to cover the opening fully with an even overlap.
The tall sash in these houses also tends to have deep, decorative casings. A roller mounted inside the frame keeps that trim on show and tucks away almost completely when raised. That matters in a house where the woodwork is part of the reason you bought it.

Transoms over doors and windows
Many of the older houses around the common have transoms: horizontal panes of glass above the front door, above interior doors, or above the main windows in a parlor. They were built to bring light deep into the house, and they still do. Most people want to keep them open, but there are times when a transom lets in too much, such as early sun over a bedroom window or a streetlight shining through above the front door.
Rectangular transoms can take a roller of their own, made to the exact size of the glass. Because a transom is short, the roller is small and neat, and it can match the shade on the window below so the two read as one. When both are lowered, the whole window is covered; when the transom shade is raised and the lower one is down, you keep light above and privacy below, which suits a front room facing the street.
Transoms are often high enough that reaching them is a nuisance. A PowerView motor on the transom roller solves that, and it can be paired with the shade below so both move together, or left on its own so you can close just the transom when the sun hits it. Arched or curved transoms are a different matter: a flat roller cannot follow a curve, so we usually leave those open, which most people prefer anyway.
Bays on the Victorians
A bay window, three or more windows set at angles in a projection from the wall, is one of the defining features of a Victorian. Foxborough’s older houses have plenty of them, in parlors, dining rooms and sometimes upstairs bedrooms. They are lovely and they are fiddly to shade.
Each window in a bay gets its own roller. The challenge is the corners: where two windows meet at an angle, the headrails must clear each other and the trim between them. We measure each window and each angle, and plan the mounts so the shades sit neatly side by side without bumping. When they are lowered, we set them to drop to the same height so the bay looks like one piece.
Fabric choice in a bay depends on the room. A parlor bay facing the street often suits a light filtering roller that glows by day and keeps the room private. A dining room bay facing the garden may take a screen so the view stays open. A bedroom bay usually wants room darkening fabric. Sonnette’s softly curved cells give a fuller, gentler look than a flat roller and suit the curves and detail of a Victorian bay especially well.

Request a Consultation
Visit a showroom or let us bring the showroom to you, with samples, an expert and a free estimate.
Entry halls, sidelights and stair windows
The front door of an older house near the common is often a small composition of glass: a transom above, a narrow sidelight on one or both sides, and sometimes a tall window on the stair landing just inside. Together they make the hall bright and welcoming, and they also let anyone on the front step see straight in.
Narrow sidelights can take a slim roller of their own, made to the width of the glass and mounted on the door frame or the panel beside it. A light filtering fabric keeps the hall bright while blurring the view from the porch, and a matching roller on the transom completes the set. On the landing, a tall window halfway up the stairs is a natural place for a PowerView motor, since reaching the top of the shade from the steps is awkward and a little risky. Choosing roller shades in Foxborough, MA, for the entry often starts with exactly this group of windows.
Upstairs bedrooms under old roofs
Bedrooms in the older houses tend to have tall windows of their own, sometimes with a smaller window in a gable end or a dormer at the back. Morning light on the east side of a Victorian can reach right across the room, and streetlights around the common shine into front bedrooms at night.
For these rooms a room darkening or blackout roller is the usual answer. Because the side gaps on an inside mount are a larger share of a narrow window, an outside mount on the casing or a pair of side channels gives a far darker room. Where the bedroom also has a transom over the door to the hall, a small matching roller keeps light from the landing out at night.

Ranches and subdivisions toward Route 1
Out from the center, the post-war ranches and newer subdivisions toward Route 1 are much easier to fit. Their windows are standard modern openings, square and regular, and most take an inside mount without any fuss. That makes a whole-house order quick to plan, with shades that line up neatly from room to room.
What these houses ask for is mainly sun control. A ranch living room with a wide picture window, or a family room in a newer colonial with a slider to the deck, can take a lot of afternoon light. A solar screen on those windows cuts the glare and the heat while keeping the yard in view. Upstairs bedrooms in the colonials usually want room darkening or blackout fabric, with side channels or an outside mount if you want them truly dark.
The kitchens in the newer houses are often open to the family room, with a window over the sink and a breakfast area beside the slider. Carrying one fabric across that whole run makes the space feel connected, and a wipe-clean cloth over the sink keeps life easy.

How we measure an old window
Getting the measurements right is the whole job on a Victorian sash, and it is why we measure every window ourselves at the consultation. Here is how we go about it.
- We measure the width of the opening at the top, the middle and the bottom, and use the narrowest for an inside mount.
- We measure the height on the left, in the center and on the right.
- We check the depth of the frame where the headrail will sit, and look for sash locks, pulleys, storm panels and anything else in the way.
- We look at how square the opening is, and decide with you whether an inside or outside mount will look and work better.
- For bays and transoms, we measure each piece of glass and the angles and trim between them.
- We confirm each mount, fabric and lift choice with you before anything is ordered.
Before any of that, we walk the rooms with you and hold samples to the windows, because our vans carry the range and we can bring the showroom to you. After the measuring, you get a free estimate for the shades you are considering. Our page on what happens at an in-home consultation describes the visit from start to finish, and our interior design consultations can help with color and fabric across a whole room.

Formal rooms around the common: rollers with drapery
The parlors and dining rooms in the older houses around the common often have, or deserve, drapery: full-length panels that frame the tall windows and soften the room. In those rooms, a roller works best as a quiet partner rather than the main event.
Mounted inside the frame behind the drapery, a slim light filtering roller does the daily work of cutting glare and giving privacy, while the curtains stay open as a frame. In the evening, lower a room darkening roller and draw the drapery for a warm, enclosed room. Choosing a roller fabric that matches the wall or the window trim helps it disappear behind the curtains, so the drapery stays the star.
We carry Hunter Douglas drapery too, so if your formal rooms need both, we can plan them together at the same visit, making sure the roller and the drapery hardware fit alongside each other on the window.

Motorizing the tall and the high
Between tall sash, transoms and stairwell windows, the older houses in Foxborough have plenty of glass that is awkward to reach. PowerView motorization takes care of it. Shades rise and fall from a phone, a remote or a schedule, and you can group them by room or by side of the house. A transom and the window below can move as one, and every shade on the street side can lower together at dusk. How each motor is powered is something we plan at the visit, window by window.
In the newer houses, motorization is most useful on the family room slider and any tall or wide glass, and for anyone who likes the house to open in the morning and close at night without thinking about it. Our page on motorized blinds in Foxborough explains the system, and how motorized shades are controlled covers the options in more depth.
Choosing fabric for a period house
Fabric is half the look of a roller, and in a Victorian or an old colonial it matters more than usual. Glossy, modern-looking screens can feel out of place against old woodwork and plaster. Textured weaves, linen-look cloths and soft solids usually suit a period room much better, and patterned rollers can echo the wallpaper or the upholstery. Many people choose roller shades in Foxborough, MA, in warm whites, creams and muted tones that sit comfortably with painted trim.
From the street, the older houses around the common are seen in full, so it helps to keep the front windows in one color family. Fabrics with a neutral back show as a calm, even tone from outside, whatever color you choose for inside.
For other rooms, we also fit cellular shades in Foxborough and plantation shutters in Foxborough, and our Foxborough page lists everything we do in town. The main roller shades page sets out every roller line.

Gallery dealer, certified installers
Hunter Douglas grants its Gallery designation to a limited group of dealers, and Blinds & Designs carries it. For an old house with transoms and bays, that means the full range of roller fabrics, lifts and motors is available, along with the experience to fit them to windows that are anything but standard.
Every shade we sell is fitted by installers certified by Hunter Douglas. They shim and level patiently on settled frames, set the brackets in a bay so the headrails clear each other, and test every shade before they leave.
And when a shade needs looking at later, we offer blind and shade repairs too.

Our Franklin showroom
The Franklin showroom is the nearest of our locations to Foxborough. Call in if you would like to see shades before the home visit.
The home visit is where everything is measured and the fabric is judged against your own light.
Questions from Foxborough
Can you cover the transom above my window?
If it is rectangular, yes, with a small roller made to the exact size of the glass, matched to the shade below. A motor makes a high transom easy to use. Arched transoms are usually left open.
My old windows are not square. Will a roller hang straight?
Yes, when it is made to measure. We measure each window at several points and build the shade to the narrowest width for an inside mount, or mount it on the casing if the frame is too far out of square.
How do roller shades work in a bay window?
Each window gets its own roller, with the headrails planned to clear each other at the angles. Lowered to the same height, the shades read as one.
Can I have roller shades behind my drapery?
Yes. A slim roller inside the frame handles daily light and privacy while the drapery frames the window, and both can be closed at night.
Do you charge for an estimate?
No. The estimate is free, and we take every measurement ourselves at the consultation.
Take the next step
If your windows are old, unusual or simply many, the place to start with roller shades in Foxborough, MA, is a visit. Request a consultation and we will bring samples to your house, measure each window properly and give you a free estimate. To ask a question first, press the call button, or call in at the Franklin showroom.