
Standard windows, so the choice comes down to you
Hanson is an easy town to measure. Its post-war capes and ranches sit on generous lots, the newer colonials off Main Street and around Maquan Pond were built with modern frames, and the windows throughout are standard sizes, set square. There are very few awkward openings to solve. That changes the conversation about custom blinds in Hanson, MA: fit is rarely the question, so the decisions that matter are what the blind is made of and how you will work it.
Those two choices shape how a blind looks, how long it stays looking good and how much you enjoy using it. Real wood and faux wood look alike from across a room but behave very differently in a steamy bathroom. A cordless lift and a motor both get rid of hanging cords, but one is right for a bedroom window you open once a day and the other for a family room you adjust every hour.
Hunter Douglas makes blinds in wood, faux wood, metal and vertical styles, with several ways to raise and tilt each one. We bring working samples of all of them, so you can feel the weight, try the controls and see the colors against your own walls.
Four materials and two ways to work them
Here is the short version of what we bring to a Hanson house. The rest of the page goes into the detail.

Wood blinds
Genuine timber slats, surprisingly light, stained to show the grain or painted smooth. Suited to the dry rooms of the house.

Faux wood blinds
A painted-wood appearance that will not mind damp air. For kitchens, baths, laundry rooms and mudrooms.

Metal blinds
Fine aluminum that angles exactly where you want it. For entries, offices and modern rooms.

Vertical blinds
Vanes or gliding panels that draw to one side, for sliders and patio doors.

Cordless lift
Push the bottom rail up, pull it down, and the blind stays where you leave it. No cords hanging at the side.

PowerView motorization
Raise, lower and tilt from a phone, a remote or a wall switch, or set the blinds on a schedule.
Post-war capes on generous lots
Hanson’s capes are the classic post-war kind: a steep roof, a central front door with a window either side, the main rooms downstairs and bedrooms tucked up under the eaves. The lots are generous, so many capes have been extended over the years with a dormer across the back, a family room or a garage with a room above.
Downstairs, the front windows usually come as a matching pair. They suit a matching pair of blinds, in the same color, slat and height, which keeps the house looking tidy from the road. Inside, the front room often takes real wood, and the kitchen at the back takes faux wood in a matching tone.
Upstairs, cape bedrooms have dormer windows set into deep boxes in the roof slope. That depth is ideal for an inside mount: the blind sits inside the box, the trim stays clean and the raised blind tucks up out of view. A shed dormer added across the back usually has a row of standard windows that take a matching set of blinds. Where a bedroom faces east, a darker slat helps with the early light.
Ranches: one floor, many windows
Hanson’s ranches spread across their lots on a single floor, which means a lot of windows on the same level and often on three or four sides of the house. A typical one has a picture window at the front, a kitchen window over the sink, bedrooms with wide horizontal windows, and a slider or a door with glass at the back.
Because every window is standard, the plan is mostly about consistency and use. The picture window often becomes two or three blinds on one headrail, so you can open part of it for the view and keep part closed against glare on the television. The bedrooms take a deeper slat color, or an outside mount that covers the frame edges. The kitchen takes faux wood. The slider takes a vertical blind or gliding panels. And all the street-facing windows share one color, so the long front of the house looks even.

Newer colonials off Main Street and around Maquan Pond
The newer colonials off Main Street and near Maquan Pond are two-story houses with modern windows in regular rows, an open kitchen and family room at the back, and often a bonus room above the garage. Near the pond, the family room or the main bedroom may look out over the water.
Here the number of windows is the main thing. A colonial has a great many of them, most identical, and choosing a blind for each one separately would be tiring. Instead we group them: one material and color for the formal rooms and the street side, faux wood for the wet rooms, perhaps metal for an office, and verticals or gliding panels for the slider. The pond-facing rooms get wider slats for a clearer view, and the bonus room gets a darker blind for films.
Rooms over the garage and extensions at the back
Generous lots have given many Hanson houses room to grow. A room over the garage, a family room built onto the back of a ranch or a shed dormer across a cape all add windows that were not in the original plan, and they often face a different way from the rest of the house. A room over the garage might be a home office one year and a playroom or guest room the next.
Blinds are a forgiving choice for rooms like these, because the tilt lets the same blind handle a bright morning, a screen in the afternoon and a guest who wants to sleep late. We usually match the new windows to the color already used on that side of the house, so the addition blends in from outside, and pick the material and control for what the room is used for now.
Material, compared honestly
Since fit is simple in Hanson, it is worth knowing how the materials really differ. Here is what we tell you at the window, and our custom blinds overview shows the full range.
Real wood
Wood blinds are lighter than they look, which makes wide wood blinds easy to raise. The grain shows through a stain, and a painted wood slat has a soft, solid finish that plastic cannot quite copy. Wood is happiest in dry rooms. In steady steam or splashes it can warp over time, so we keep it out of bathrooms and away from the sink. Our wood blinds and Parkland pages go into the range.
Faux wood
Faux wood looks like a painted wood blind from a few steps away and is made to cope with humidity. It wipes clean and holds its shape in a bathroom or over a kitchen sink. It is heavier than real wood, so on a very wide window we may split it into two blinds. Many houses use faux wood in the wet rooms and real wood elsewhere, matched in color. See EverWood faux wood blinds.
Metal
Aluminum blinds have slim slats and a fine headrail, and they tilt with real precision. They suit a modern room, an office where you need to keep sun off a screen, or an entry window where you want something light. See our metal blinds page.
Vertical
Verticals hang from a track and draw to one side. They are made for sliders and patio doors, where lifting a horizontal blind every time you go out would be a chore. See vertical blinds.

Request a Consultation
Visit a showroom or let us bring the showroom to you, with samples, an expert and a free estimate.
Operation: the part you touch every day
With custom blinds in Hanson, the controls deserve as much attention as the slat. A blind you fight with every morning is a bad blind, however good it looks. Hunter Douglas offers several ways to raise and tilt, and each has its place.
Cordless lift. There are no lift cords at all. You raise the blind by pushing up on the bottom rail and lower it by pulling down, and it stays at any height. It looks clean and is the safer choice in a house with young children or pets.
Tilt wand. A wand hanging at one side turns the slats with a twist. It is simple and tidy and easy to reach on most windows.
Corded tilt and lift. Traditional cords still suit some windows, such as a high window where a long cord is easier to reach than a wand. We point out the safety side and suggest a cordless or motorized option wherever children are around.
PowerView motorization. A motor raises, lowers and tilts the blind from a phone, a remote or a wall switch. Blinds can be grouped, so one tap tilts a whole room, and schedules can open and close them at set times. Where each motor gets its power is something we settle with you at the visit, window by window. For a plain-English rundown of remotes, apps and schedules, see how motorized shades are controlled.
Color across a whole house
With so many standard windows, color is where a Hanson house gets its character. On a cape or a ranch, the street-facing blinds are seen together from the road, so they usually share one color, often a white or a soft neutral that suits the siding and the trim. Inside, you have more freedom. A stained wood blind can warm up a den, a deeper tone can hide the dust that a white slat shows near an open window, and a crisp white can make a small kitchen feel larger.
Matching across materials is the other skill. Real wood, faux wood and aluminum take color differently, so a white wood slat and a white faux wood slat are not quite the same. We bring each material in the colors you are considering and hold them side by side, so a faux wood bathroom blind and a wood bedroom blind next door look like a set. Planning custom blinds in Hanson, MA this way avoids the patchwork look that comes from buying room by room.
Which control for which room
A quick guide we often sketch out on the visit:
- Bedrooms: cordless lift with a wand tilt, or PowerView on a morning schedule.
- Kitchen over the sink: cordless faux wood, so you are not reaching across the counter for a cord.
- Family room with several windows: PowerView, grouped, so one button sets the whole room.
- Pond-facing room near Maquan Pond: wider slats, with a wand or motor for frequent tilting as the light changes.
- Children’s rooms and playrooms: cordless or motorized, always.
- Slider: verticals or gliding panels with a wand.

Darkening, privacy and the gaps at the edges
Even on a standard window, the mount changes how a blind performs. An inside mount sits within the frame and looks neat, with the trim fully on show, but leaves a small gap at each side where light can slip past. An outside mount sits on the wall or casing and overlaps the opening, which cuts those edge gaps and makes a room darker.
For most living rooms an inside mount is the better look. For a bedroom or a bonus room used for films, an outside mount in a deep color, closed upward, gives a much darker room. Cloth tapes over the ladder cords also help, because they cover the small holes in each slat that let pinpricks of light through. When we plan custom blinds for Hanson, MA bedrooms, we bring both mounts and both tape styles so you can compare.
Your consultation at home
With standard windows, a home visit moves quickly, and it is the best way to choose material and controls, because you can handle each one where it will live. Our vans are stocked with samples, so the showroom comes to your living room.
- Arrange a time through the Request a Consultation form, or ask through the call button.
- We bring every blind material, slat widths, colors, tapes and valances, and working samples of each control.
- You try the controls with your own hands: the cordless lift, the wand, the motor.
- We agree a material, color and control for each room, grouping windows that should match.
- Each opening is measured and its depth checked.
- You receive a free estimate for the blinds you have in mind, and take your time over the decision.
Want help with a color scheme too? An interior design consultation can be folded into the same appointment. The in-home consultations page sets out how the visit works.

Fitting your blinds
On fitting day our certified Hunter Douglas installers mount each bracket into solid framing, set the headrails level and line up the blinds across each row of windows so the tops match. Each blind gets a full run up, down and through its tilt while we are still there; motors are linked to their remotes and gathered into the groups you asked for, and you get a walk-through of every control.
Good fitting is what turns well-chosen blinds into a finished room. Custom blinds in Hanson, MA are made to the exact openings we measure, and a careful install lets them sit flush in the frame and run smoothly day after day. Our page on what happens on installation day covers the visit.

A Gallery dealer with certified installers
Hunter Douglas keeps the Gallery title for dealers who meet its standards, and we hold it, and for you it means every blind material, every control and PowerView motorization from one place.
The people who fit your blinds are Hunter Douglas certified installers. And if a blind you already own needs a cord or a tilt mechanism replaced, our blind and shade repair service is there for it.
For other windows in the house, see cellular shades in Hanson, roman shades in Hanson or motorized blinds in Hanson. Our Hanson page shows every service we offer in town.

Seeing blinds in Sagamore
Sagamore is our nearest showroom to Hanson. The Sagamore showroom page lists its address and hours.
Many Hanson customers go straight to a home visit, because choosing material and controls is easiest with the samples in your own hands at your own windows.
Questions from Hanson
My windows are all standard sizes. Do I need custom blinds?
Built to the real opening, a blind leaves only a slim, even margin down each side instead of the wide strips a stock size leaves. You also pick every detail, from slat and tape to the way it lifts, window by window.
Real wood or faux wood?
Real wood wherever the air stays dry, such as a front room or a bedroom. Faux wood in kitchens, bathrooms and laundry rooms, where steam and splashes would trouble real wood. We match the colors so the house looks consistent.
What is the safest control for a child’s room?
Cordless lift or PowerView motorization. Neither has hanging cords.
Can I tilt all the blinds in a room at once?
Yes, with PowerView. Blinds can be grouped so one tap on your phone or remote tilts or raises the whole room, and schedules can do it automatically.
How much does the estimate cost?
It costs nothing. Free estimates are written once we have measured your windows.
Start with a visit
The fastest way to settle on a material and a control is to try them at your own window. Fill in the Request a Consultation form to book a home visit: samples of every material and control, measuring of each opening and a free estimate at the end. If you would sooner talk it over, tap the call button for our Sagamore showroom, where you can also see blinds in person.