What Happens on Installation Day, in Plain Language

Your shades, blinds or shutters are made and ready. Here is what the installers do when they arrive, and the few simple things you can get ready beforehand.
  • Hunter Douglas Gallery dealer
  • Certified Hunter Douglas installation
  • Free estimates

Request a Consultation

Tell us about your windows and we will be in touch.

Loading the form.

White cafe-style plantation shutters on the lower half of a powder room window, seen through the open door

The last step, and the easiest

By the time your order arrives, the hard decisions are behind you. The fabrics, colors and mounts were chosen at your windows, and every product was built by Hunter Douglas to the measurements taken at the consultation. Installation day is where all of that comes together.

It is also the step people know least about, which is why it can feel uncertain. In truth there is not much for you to do. Below is what the installers handle, what helps on your side, and what to expect once they are finished. We will not promise how long it takes, because that depends on the house and the order, but we can tell you what happens.

Between ordering and the day itself

Once you approve the estimate, your order goes to Hunter Douglas and is made to the sizes recorded at your windows. Every piece is built for one particular opening, which is why the measurements at the consultation matter so much.

When the order is ready, we get in touch to agree a date for installation day that suits you. That is a good moment to mention anything that has changed: a room being painted, new furniture arriving, a window that has been replaced, or a change of heart about which shade goes in which room. A quick word beforehand saves a muddle later.

If you have chosen motorized shades, it also helps to think about who will use them and how, so that the controls can be set up the way you want from the start.

Beige textured roller shades on wide city-view windows behind a gray sofa, with a basset hound lying on the rug

Getting the rooms ready

A little preparation makes the visit smoother for everyone. None of it is complicated.

  1. Clear the windows. Move ornaments, plants, photos and anything else off sills and window seats.
  2. Make room to work. Pull furniture back from the windows so there is space to stand and set up a ladder. A clear path from the door to each room helps too.
  3. Think about high windows. For tall foyer or great-room glass, keep the floor below clear so ladders can go where they need to.
  4. Ask about old coverings. If there are old blinds or curtains in the way, ask us when you book what to do with them.
  5. Plan for pets and children. There will be tools and ladders around, so it helps to keep them out of the rooms being worked in.
  6. Know what goes where. If you have changed your mind about which room gets what since the order, tell us before the day.
White plantation shutters on tall windows in a bright dining room, with a woman adjusting the louvers beside the table

What the installers do

Installation is certified by Hunter Douglas, which means your order goes up through certified Hunter Douglas installation rather than a general handyman. At each window the job is broadly the same: the product is matched to its opening, mounted level and square to the window, and then checked to make sure it raises, lowers, tilts or opens the way it should.

Shades and blinds

Shades and blinds hang from brackets mounted inside the window opening or on the trim above it, depending on the mount chosen at the consultation. Each one is checked once it is up, so it travels smoothly and sits evenly.

Shutters

Shutters go in with their frame, which sits inside the opening or on the trim. The panels are then hung and adjusted so they swing freely and close neatly, and the louvers tilt as they should.

Motorized shades

Motorized PowerView shades are fitted, then set up so each one answers to the controls you chose. Our guide to how motorized shades are controlled explains the remotes, wall controls, app and schedules you may have ordered.

Request a Consultation

Visit a showroom or let us bring the showroom to you, with samples, an expert and a free estimate.

Installation day in different houses

The houses across our territories each bring a few quirks to installation day.

Antique capes

Along Route 6A and in Sandwich and Hingham, older capes have small sash in deep, often out-of-square openings. The measurements already account for that, so the work is about careful mounting in old woodwork, with the trim kept looking its best.

White plantation shutters on three bedroom windows, including a high gable window, above a wood bed and nightstand

Mill-era triple-deckers

The tall, narrow windows of triple-deckers in New Bedford, Fall River and Woonsocket often come in rows across several floors. Clear stairs and landings make it easier to carry products up, and moving furniture back from each row of windows saves time on every floor.

Water-facing rooms

In Osterville, Chatham and Marion, large water-facing windows may take long shades or several side by side. Clearing the full width of the glass, not just the middle, lets the installers line them up so they look like one run.

Newer colonials with foyer glass

In Franklin, Medway and Needham, larger colonials with two-story foyers mean ladders on stairs and landings. Keep that area clear, and if you have motorized shades up high, plan to be around at the end to learn the controls.

When the work is done

Most homeowners find the end of installation day the most satisfying part: the rooms suddenly look finished.

Before the installers leave, it is worth walking round with them. Try each product yourself: raise and lower the shades, tilt the blinds, open and close the shutters, and try the remote or app on any motorized ones. Ask about anything that does not feel right while they are still there.

It is also a good time to ask how each product is meant to be used day to day. A top-down, bottom-up shade has two ways to move; a shutter has panels that swing and louvers that tilt; a motorized shade may belong to a scene as well as moving on its own. Five minutes of showing and trying saves a lot of guessing later.

Give the new coverings a little time to become part of the house. Over the first few days you will find your own rhythm: which shades you lower in the afternoon, which shutters you leave tilted, which windows you never touch. If a motorized schedule turns out to run at the wrong hour for your routine, it can be changed in the app.

After that, the rooms are ready to use. If something stops working properly down the line, we look after blind and shade repair too, so you know exactly who to call.

What you might be having installed

Peach light-filtering honeycomb shades half-raised on kitchen windows, with a woman drinking coffee by the island and a round dining table

Cellular shades

Honeycomb shades, inside or outside mounted.

A woman opens gray painted shutters on tall windows, one panel's louvers tilted open to greenery outside

Plantation shutters

Frames and panels fitted to the opening.

A man at a round table holds up a phone to adjust soft white horizontal shades on tall windows and transoms

Motorized shades

PowerView shades set up to your controls.

Installation questions

Do I need to be home?

Yes, or someone who can let the installers in and try the finished products with them at the end.

How long will it take?

It depends on how many windows, which products and the house itself, so we do not give a set time. Ask when we book the date and we will tell you what to plan for.

Will it make a mess?

Fitting brackets involves some drilling. Clearing the sills and moving things back from the windows keeps your belongings out of the way.

What if something does not fit right?

Tell the installers while they are there. Every product was built to the measurements from your consultation, and anything that needs adjusting is easiest to sort out on the spot.

Can I add more rooms later?

Of course. Many homeowners start with a few rooms and come back for more. Request a consultation whenever you are ready. See what happens at an in-home consultation.

Starting from the beginning

If you have not ordered yet, installation day is still a step away. Request a consultation, and we will bring samples to your windows, measure for the products you choose and give you a free estimate. As a Hunter Douglas Gallery dealer, we can show you the full range. You can also visit the North Dartmouth showroom, or use the call button at the top of the page.

Our Services

Request a Consultation

Visit a showroom or let us bring the showroom to you, with samples, an expert and a free estimate.